Product Details
Place of Origin: CHINA
Brand Name: BOE
Certification: RoHS
Model Number: YT038B001
Payment & Shipping Terms
Minimum Order Quantity: 10pcs
Price: USD 13-15/ PCS
Packaging Details: 50cm*50cm*60cm
Delivery Time: 20-25
Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability: 1kk/m
Screen Size: |
3.8 Inch |
Type: |
A-Si TFT-LCD, LCM |
Support Color: |
16.7M 70% NTSC |
Configuration: |
RGB( Vertical Stripe) |
Luminance: |
350 Cd/m² (Typ.) |
Input Voltage: |
2.6/3.0V (Typ.)(IOVDD/AVDD) |
Response Time: |
35 (Max.)(Tr+Td) |
Light Source: |
WLED [8S1P] , W/O Driver |
Screen Size: |
3.8 Inch |
Type: |
A-Si TFT-LCD, LCM |
Support Color: |
16.7M 70% NTSC |
Configuration: |
RGB( Vertical Stripe) |
Luminance: |
350 Cd/m² (Typ.) |
Input Voltage: |
2.6/3.0V (Typ.)(IOVDD/AVDD) |
Response Time: |
35 (Max.)(Tr+Td) |
Light Source: |
WLED [8S1P] , W/O Driver |
3.8 inch IPS TFT 480*800, high brightness, landscape LCD module
YT038B001 is a 3.8" diagonal CG-Silicon display panel product from Sharp Corporation (hereafter called Sharp), with an integral WLED backlight system, without backlight driver, without touch screen. It features an operating temperature range of -0 ~ 50°C , a storage temperature range of -25 ~ 70°C . It's general features are summarized by ADIA in the following: Portrait type, WLED Backlight . Based on its features, ADIA recommend that this model be applied to Mobile Phone etc.
Application Of TFT LCD Module
1. Office Electronic Equipment: money counting machine, office phone set, copying mechine...
General Specifications
| General Features | |||
| Diagonal Size | 3.8 inch | Type | a-Si TFT-LCD, LCM |
| Pixel Format | 480(RGB)×800 , WVGA | Configuration | RGB Vertical Stripe |
| Active Area | 49.68 × 82.8 (H×V) | Outline Dim. | 53.58 × 91.3 × 1.7 (H×V×D) |
| Bezel Opening | - | Treatment | Hard coating (3H) |
| Luminance | 350 cd/m² (Typ.) | Contrast Ratio | 750 : 1 (Typ.) (TM) 8:1 (Typ.) (RF) |
| View Direction | All o'clock | Response Time | 30/50 (Typ.)(Tr/Td) ms |
| Viewing Angle | 80/80/80/80 (Typ.)(CR≥10) | Operating Mode | IPS, Normally Black, Transmissive |
| Support Color | 16.7M | Light Source | WLED , 10K hours , No Driver |
| Weight | - | Designed For | Handheld PDA ,MP4 |
| Frame Rate | 60Hz | Touch Panel | Without |
| Interface Type | Parallel MIPI , FPC , 40 pins | ||
| Power Supply | 5.0/3.3/15.0/-15.0V (Typ.)(VSHA/VSHD/VDD/VSS) | ||
| Environment | Storage Temp.: -25 ~ 70 °C Operating Temp.: 0 ~ 50 °C | ||
Outline Dimension (unit: mm)
Related Products
| TFT-LCM | |||||||||
| Size | Model No. | Resolution | H | V | T | Golden finger spacing | Interface | PIN | IC |
| 4 | YT040B047 | 240*400 | 57.14 | 96.85 | 3.3 | P0.8/W0.4 | 8bit | 32 | ST7793 |
| 4 | YT040H018 | 480*800 | 58.18 | 99.15 | 2.2 | P0.3 | 24bit | 51 | HX8369-A00 |
| 4 | YT040H023 | 480*800 | 58.18 | 99.15 | 2.30MAX | P0.3 | 16BIT | 51 | HX8369-A00 |
| 4 | YT040H026 | 480*800 | 58.18 | 99.15 | 2.30MAX | zif | RGB+SPI | 54 | HX8369-A00 |
| 4 | YT040H027 | 480*800 | 58.18 | 99.15 | 2.2 | P0.3 | 24bit | 39 | HX8369-A00 |
| 4 | YT040H033 | 480*800 | 58.18 | 99.15 | 2.2 | P0.3, | RGB+SPI | 51 | HX8369-A00 |
| 4 | YT040H038 | 480*800 | 58.18 | 99.15 | 2.2 | P0.3 | 16bit | 45 | HX8369-A00 |
| 4 | YT040H044 | 480*800 | 58.18 | 99.15 | 2.2 | zif | 24bit | 40 | HX8369-A01 |
| 4 | YT040H045 | 480*800 | 56.34 | 95.7 | 1.9 | zif | MIPI | 25 | HX8369-A01 |
| 4 | YT040H032 | 480*800 | 56.34 | 95.7 | 1.9 | P0.3 | MIPI | 23 | HX8369-A01 |
PRECAUTIONS
1.HANDLING
1.1.Polarizer Cleaning, Petroleum ether (or N-hexane) is recommended for cleaning the front/rear polarizers and reflectors, acetone, toluene and ethanol are not allowed to avoid damaging the surface.
1.2. Body grounding, must wear Anti-ESD wrist strap while pick up LCDs.
1.3. FPC Soldering, less than 300℃/3S, solder must be grounding on grounding bench.
1.4. If use electric Screwdriver to do assembly, screwdriver must be grounding.
2.STORAGE
2.1. Keep in a sealed polyethylene bag.
2.2. Keep in a dark place.
2.3. Keep in temperature between 0°C and 35°C.
NOT allowed at 70°C for more than 160 Hours, or at -20°C for more than 48 Hrs.
3.SAFETY
If liquid crystal leak out of a damaged glass cell, DO NOT put it in your mouth or touch eyes, if the liquid crystal touch your skin or clothes, please wash it off immediately using soap and water.
FAQ
Q1. How can I trust your product quality?
A:
--Our Raw materials are all ROHS compliant .
--Display is an ISO9001:2008 and ISO9001:2015 Certified company, we’ve been adhering to the ISO standards strictly in our production.
--Our products are 100% Visual and Function test before shipments.
Meanwhile, we do necessary Aging test and Reliability tests to our TFT Display modules, eg. Store and Operate in High and Low Temperature & High Humidity Environment, ESD and anti-interference test , Drop(with package) and Vibration Test.
Our Touch Screens goes through Salt spray test, Hardness test, Steel ball Drop test, Flatness test, Thermal shock test…
--Our experience and proficiency make the qualification rate always being 99.7% or above.
Q2. Which sizes of LCDs and Touch Panels do you provide?
A:
--Small sizes which include: 0.96”, 1.22”, 1.3”, 1.44”, 1.54”, 1.77”, 2.0”, 2.4”, 2.7”, 2.8”, 3.0”, 3.2”, 3.5”, 3.95”, 3.97”, 4.3”, 5”, 5.6”, 6.86”.
--Middle sizes which include: 7”, 8”, 9”, 10.1”, 10.2”, 13.3”,14.1",15.6",17",21.5",23
Q3. Can I have a sample order of before formal order?
A: Yes, sample order is always welcome for new projects or replacement of running projects. We have stock of many standard models of TFT LCD modules and Touch screens from 0.96inch to 13.3inch , which means delivery is able to be made the same day as order.
Q4. What is the lead time for Sample order and Mass Production order?
A:
--For LXDisplay standard products, the lead time for samples is usually 1-7 days, for mass production it could be as fast as 10 days.
--For Customized products,
We are able to get new FPC ready in 7days, new Backlight in 15days, and new Capacitive touch panel or Resistive touch panel in 18days.
Mass production of special products could be as fast as 3weeks.
--In summary, based on our years of big output, we have been keeping good relationship with LCD panel, IC and other material suppliers, we had a steady supply even when there was heavy shortage of materials.
Q5. Do you have MOQ requirement?
A: Yes, it depends on different sizes of products. Please refer to our sales, thanks.
Q6. How do I work with you on Customized products?
A: Firstly please provide us the description of your special requirements, any Drawing or Specification---Our engineers will work out the compatible solution and also mould cost (if any)---We provide Drawing and Specification for Approval---We provide samples for approval after reliability test and aging test---We make modification if necessary---We do small quantity of trial order (if required)---We do mass production.
