|Place of Origin:||Japan|
|Minimum Order Quantity:||1pcs|
|Price:||USD 13-15/ PCS|
|Payment Terms:||L/C, D/A, D/P, T/T, Western Union, MoneyGram|
|Screen Size:||3.8 Inch||Display Mode:||Normally Black,, Transmissive|
|Display Colors:||16.7M 70% NTSC||Pixel Arrangement:||RGB( Vertical Stripe)|
|Frequency:||60Hz||Input Voltage:||2.6/3.0V (Typ.)(IOVDD/AVDD)|
|Response Time:||35 (Max.)(Tr+Td)||Surface:||Hard Coating (3H)|
|Panel Type:||CG-Silicon , LCM||Best View On:||Symmetry|
NT35560 Lcd TFT Display,
RAM IC Lcd TFT Display,
480x800 Pixel Tft Lcd Panel
3.8 Inch NT35560 with RAM IC TFT Display 40 Pin 480x800 Pixel
LS038Y1LX04 is a 3.8" diagonal CG-Silicon display panel product from Sharp Corporation (hereafter called Sharp), with an integral WLED backlight system, without backlight driver, without touch screen. It features an operating temperature range of -20 ~ 70°C , a storage temperature range of -40 ~ 80°C . It's general features are summarized by ADIA in the following: Portrait type, WLED Backlight . Based on its features, ADIA recommend that this model be applied to Mobile Phone etc.
|1||LCD Size||3.8 inch diagonal||inch||-|
|3||Resolution||480(RGB)×800, WVGA, 245PPI||pixel||-|
|4||Display Mode||Normally black,Transmissive||-||-|
|5||Display Number of Colors||16.7M 70% NTSC||-||Note|
|6||Viewing Direction||80/80/80/80 (Typ.)(CR≥10)||-||-|
|7||Contrast Ratio||900:1 (Typ.) (TM)||-||-|
|8||Brightness||390 cd/m² (Typ.)||cd/m2||Note|
|9||Outline Size||54.6(W)×93(H) ×2(D) mm||mm||Note|
|10||Display Area||49.68(W)×82.8(H) mm||mm||-|
|11||Pixel Pitch||0.36(W ) x 0.108(L)||mm||-|
|14||Lamp Type||7S1P WLED , Without Driver||bit||-|
|15||Light Source||8 LEDs White||-||-|
|16||Signal Interface||MDDI (2 data lanes) , 23 pins Connector||-||-|
Outline Dimension (unit: mm)
|Size||Model No.||Resolution||H||V||T||Golden finger spacing||Interface||PIN||IC|
Why Choose us:
1.Our company established in 2011, and have a long-term cooperation with many well-known company.
2.We have a professional r&d team and technical support.
3.We have a large number of spot inventory and we can ship delivery asap after payment.
4.We are direct agent of these brands,ordering process simple and delivery time short.
5.All screen ship from our company has long warranty and we have enough technical support can provide after-sales service.
1.1.Polarizer Cleaning, Petroleum ether (or N-hexane) is recommended for cleaning the front/rear polarizers and reflectors, acetone, toluene and ethanol are not allowed to avoid damaging the surface.
1.2. Body grounding, must wear Anti-ESD wrist strap while pick up LCDs.
1.3. FPC Soldering, less than 300℃/3S, solder must be grounding on grounding bench.
1.4. If use electric Screwdriver to do assembly, screwdriver must be grounding.
2.1. Keep in a sealed polyethylene bag.
2.2. Keep in a dark place.
2.3. Keep in temperature between 0°C and 35°C.
NOT allowed at 70°C for more than 160 Hours, or at -20°C for more than 48 Hrs.
If liquid crystal leak out of a damaged glass cell, DO NOT put it in your mouth or touch eyes, if the liquid crystal touch your skin or clothes, please wash it off immediately using soap and water.
Unless otherwise agreed between ADIA and customer, ADIA will replace or repair any of its LCD modules which are found to be functionally defective when inspected in accordance with ADIA LCD acceptance standards (copies available upon request) for a period of one year from date of shipments. Cosmetic/visual defects over specs must be returned to ADIA within 30 days of shipment. Confirmation of such date shall be based on freight documents. The warranty liability of ADIA limited to repair and/or replacement on the terms set forth above. ADIA shall not be responsible for any subsequent or consequential events.
4.1RETURNING LCM UNDER WARRANTY – TERMS AND CONDITIONS
4.1.No warranty can be granted if the precautions stated above have been disregarded. The typical examples of violations are :
- Broken LCD glass.
- Circuit modified in any way, including addition of components.
4.2.Module repairs will be invoiced to the customer upon mutual agreement. Modules must be returned with sufficient description of the failures or defects. Any connectors or cable installed by the customer must be removed completely without damaging the PCB’s eyelet, conductors and terminals.
Q1. How can I trust your product quality?
--Our Raw materials are all ROHS compliant .
--Display is an ISO9001:2008 and ISO9001:2015 Certified company, we’ve been adhering to the ISO standards strictly in our production.
--Our products are 100% Visual and Function test before shipments.
Meanwhile, we do necessary Aging test and Reliability tests to our TFT Display modules, eg. Store and Operate in High and Low Temperature & High Humidity Environment, ESD and anti-interference test , Drop(with package) and Vibration Test.
Our Touch Screens goes through Salt spray test, Hardness test, Steel ball Drop test, Flatness test, Thermal shock test…
--Our experience and proficiency make the qualification rate always being 99.7% or above.
Q2. Which sizes of LCDs and Touch Panels do you provide?
--Small sizes which include: 0.96”, 1.22”, 1.3”, 1.44”, 1.54”, 1.77”, 2.0”, 2.4”, 2.7”, 2.8”, 3.0”, 3.2”, 3.5”, 3.95”, 3.97”, 4.3”, 5”, 5.6”, 6.86”.
--Middle sizes which include: 7”, 8”, 9”, 10.1”, 10.2”, 13.3”,14.1",15.6",17",21.5",23
Q3. Can I have a sample order of before formal order?
A: Yes, sample order is always welcome for new projects or replacement of running projects. We have stock of many standard models of TFT LCD modules and Touch screens from 0.96inch to 13.3inch , which means delivery is able to be made the same day as order.
Q4. What is the lead time for Sample order and Mass Production order?
--For LXDisplay standard products, the lead time for samples is usually 1-7 days, for mass production it could be as fast as 10 days.
--For Customized products,
We are able to get new FPC ready in 7days, new Backlight in 15days, and new Capacitive touch panel or Resistive touch panel in 18days.
Mass production of special products could be as fast as 3weeks.
--In summary, based on our years of big output, we have been keeping good relationship with LCD panel, IC and other material suppliers, we had a steady supply even when there was heavy shortage of materials.
Q5. Do you have MOQ requirement?
A: Yes, it depends on different sizes of products. Please refer to our sales, thanks.
Q6. How do I work with you on Customized products?
A: Firstly please provide us the description of your special requirements, any Drawing or Specification---Our engineers will work out the compatible solution and also mould cost (if any)---We provide Drawing and Specification for Approval---We provide samples for approval after reliability test and aging test---We make modification if necessary---We do small quantity of trial order (if required)---We do mass production.
Q7. Can I have my own silk screen Logo, Part Number or small label?
A: Yes, Definitely. It may requires MOQ, please refer to our sales, thanks.
Q8.How long is the warranty and what is your after-sales service?
A: Usually 12 Months.
If there is any defect within 12months from receiving products, please contact our sales, we will respond within 24hours. If we require any product to be returned to us, the shipping cost will be fully paid by us.
Q9. Do you have any shipping account and can you quote favorable shipping cost?
A: Yes, we have been working with DHL, Fedex more than 11 years, our shipping accounts were granted discount as much as 85% off . Please feel free to ask our sales no matter it is sample or formal order shipment.
Contact Person: Joe Chen