|Place of Origin:||china|
|Minimum Order Quantity:||200pcs|
|Display Number Of Colors:||16.7M||Resolution:||800x (RGB) X 480|
|Panel Type:||IPS||LCD Size:||5.0 Inch|
ST7262 5.0 inch Industrial TFT Display,
ST7262 5.0 inch tft display panel,
16.7M color tft display panel
16.7M Color ST7262 5.0 Inch Industrial TFT Display
YT050H001 Display model 5.0" is a color active matrix thin film transistor (TFT) liquid crystal display without polarizer. This model is composed of amorphous silicon TFT as a switching device. It is a transmissive type display operating in the normally white mode.
This TFT LCD has a 5.0-inch diagonally measured active display area with 800 x 480 dot (800 vertical by 480 horizontal pixel) resolution. Each pixel is divided into Red, Green, Blue dots which are arranged in vertical stripes.
|3||Resolution||800x (RGB) x 480||pixel||-|
|4||Display Mode||Normally Black||-||-|
|5||Display Number of Colors||16.7M||-||Note|
|9||Module Size||75.80(W) × 120.70( L) ×3.10(T)||mm||Note|
|10||Active Area||87.6( W) × 87.6(L)||mm||-|
|11||Pixel Pitch||0.1355(W ) x 0.135(L)||mm||-|
|14||CTP Driver IC||-||-||-|
|15||Driver IC RAM Size||RAMLess||bit||-|
|17||Light Source||18LEDs White||-||-|
Outline Dimension (unit: mm)
1. According to customer requirements custom structure, touch screen, FPC, configuration.
2. Accept small batch production, a full set of technical support services.
|Size||Model No.||Resolution||H||V||T||Golden finger spacing||Interface||PIN||IC|
1. How to understand Stock for Sale.
Answer:According to the company regulation, each standard product must be kept the stock of 1000pcs.
When the stock is less than 1000 pcs, we will put it into production at once instead of waiting for the orders. When the stock are more than 5000 pcs, the production must be stopped.
Appropriate stock is a very good support for the customer’s sampling and trial production demand.
The appropriate stock is also a guarantee of the quality. The production of the stock is always having more time than the production of the order. We have enough time to do more checking and to consider all the possible factors affecting the quality,
what’s more, in case that our products has been found a problem at the customer’s production, we have the stocked ones to do the replacement.
The appropriate stock is also a good way to reduce the cost. In busy seasons, we can produce the orders, while in free seasons, we can produce the stock. By this way, the labor source is maximumly used. At the same time, in free season, the materials can be bought at lower price.
2. How does Adia do for Never End of Supply?
Answer:EOL(End of Life) is largely because of end of life of the raw materials
When the EOL of the raw materials such as drivers and LCD panels happens, we can place a very large order with the supplier which may cover the consumption of one or two year. This large order is enough for the supplier to restart the production.
On the other hand, we can develop the replacement product which is mechanically and functionally the same as the previous one. For
the customer, only software will be changed a little while the hardware will remain the same.
Adia has built comprehensive relationships with the supplier samsun as LG, Hannstar and BOE and we can get the EOL products through our special channel to guarantee the continuous supply.
In LCD industry, due to the quick update of the technology, never end of supply is hard, but so far, Adia has never disappointed any customer.
Once the customer chooses us, we will offer the unchanged service till the end. Long-time relationship and mutual trust are our target and we hate well beginning but bad ending.
3. How to understand No MOQ?
Answer:The quantity of the order is decided by the market. As a supplier, we have no right to request the order must be more than any quantity. We have no MOQ request, a single piece is also a good order for us.
In another way, our products are always having stock, we don’t need to start the production for a small quantity, and we are capable enough of accepting the small orders.
However, if the quantity is small, the price will be higher.
4. How to understand in Full Range.
Answer:In full range means that our products are in great variety. We have what other manufacturers have, and we have what they don’t have. The customer is easy to find what they want in our product group. Like Walmart instead of Seven Eleven, all kinds of the products are placed before us and it is easy to attract the customers to come, so we like going shopping in Walmart, but we don’t like to go to Seven Eleven.
5. How does Adia guarantee the quality?
Answer: Adia has passed ISO9001:2008 certification. ISO principle is carried out in daily activities. The quality is strictly controlled in designing, material incoming, production process, equipment, management and checking and the rejects are not allowed to flow at any circumstances.
Adia has thousands of customers, in many cases, one product is being used by many customers. If one product is used by many factories, the quality is believable because most of the problems were solved already.
The Adia is following the quality standards from automotive industry. Special attention is paid to the capacity of anti-high-temperature, anti-shock and aftersales reliability. We don’t fear the rejects on the production line, we badly fear the rejects at the final consumer’s hand. Solving such kind of rejects are most costly. Adia is always pursuing 0 aftersales reject, so we adopted the strictest quality standards.
6. Why are Adia’s products higher in price?
Answer: The LCD quality has three standards: 1.consuming standards.2.Industrial standards 3.Automotive standards. Automotive standards are the highest grade which require the strong anti-shock capacity, anti-high-temperature capacity, high reliability and very low rate of reject. To follow automotive standards, we have to select the best raw materials, and bring in the most expensive equipment and very tough management, so our cost is higher.
In fact, our higher price is only manifested in samples. If the quantity is higher or the cooperation time is long, as long as the customer files the price request, the favorable price can be available after negotiation.
7. How long can we expect the samples?
Answer: Immediately in most of the cases.
HANDLING & CAUTIONS
(1) Cautions when taking out the module
1. Pick the pouch only, when taking out module from a shipping package.
(2) Cautions for handling the module
1.As the electrostatic discharges may break the LCD module, handle the LCD module with care. Peel a protection sheet off from the LCD panel surface as slowly as possible.
2.As the LCD panel and back - light element are made from fragile glass material, impulse and pressure to the LCD module should be avoided.
3.As the surface of the polarizer is very soft and easily scratched, use a soft dry cloth without chemicals for cleaning.
4.Do not pull the interface connector in or out while the LCD module is operating.
5.Put the module display side down on a flat horizontal plane.
6.Handle connectors and cables with care.
(3) Cautions for the operation
1.When the module is operating, do not lose CLK, ENAB signals. If any one of these signals is lost, the LCD panel would be damaged.
2.Obey the supply voltage sequence. If wrong sequence is applied, the module would be damaged.
(4) Cautions for the atmosphere
1.Dew drop atmosphere should be avoided.
2.Do not store and/or operate the LCD module in a high temperature and/or humidity atmosphere. Storage in an electro- conductive polymer packing pouch and under relatively low temperature atmosphere is recommended.
(5) Cautions for the module characteristics
1. Do not apply fixed pattern data signal to the LCD module at product aging.
2.Applying fixed pattern for a long time may cause image sticking.
(6) Other cautions
1.Do not disassemble and/or re-assemble LCD module.
2.Do not re-adjust variable resistor or switch etc.
3.When returning the module for repair or etc., Please pack the module not to be broken.
We recommend to use the original shipping packages.
Founded in 2011, Shenzhen Yada Xingye Technology Co., Ltd. is a high-tech private enterprise specializing in R & D, production and sales of LCD, LCM, TFT color LCD, touch screen and industrial serial port screen. And can provide a complete set of display screen and display scheme (PCBA).
It has a variety of standard and differentiated LCD module (LCM), LCD and TFT color display products. Make LCD and LCM with various specifications and technical requirements according to customer requirements. The products are widely used in instruments, smart phones, tablet computers, POS machines, medical equipment, car machines, intelligent robots, smart home, intelligent wearable products, UAVs, VR / AR eyes, military products and other fields. The products strive to achieve high quality, micro power consumption, fast delivery, reasonable price and timely technical support. With a number of well-known enterprises at home and abroad to carry out extensive cooperation, products have won wide market application and recognition.
The company attaches great importance to product quality and strictly implements IOS9001 and RoHS management. Stable quality, professional technical support and timely service are the commitment of ADIA to customers. Today, the TFT market is more and more widely used. With the consistent persistence, ADIA works hard to create a professional and well-known manufacturer of TFT display screen industry together with customers and suppliers.
Contact Person: Joe Chen