|Place of Origin:||china|
|Minimum Order Quantity:||1pcs|
|Price:||USD 415/ PCS|
|Product Name:||Industrial TFT Display||Size:||6.5 Inch|
|Pixel Format:||1024(RGB)×768 [WVGA] 196PPI||Interface:||20 Pins LVDS|
|Connect Type:||LVDS (1 Ch, 6/8-bit) , 20 Pins Connector||Color Depth:||16.7M 50% NTSC|
|Screen Type:||LCM,a-Si TFT-LCD||Work Mode:||TN, Normally White, Transmissive|
|Arrangement:||R.G.B. Vertical Stripe||Good View At:||6 O'clock|
|Viewing Direction:||80/80/80/60 (Typ.)(CR≥10)||Treatment:||Clear, Hard Coating (2H), Antireflection|
6.5 Inch Industrial TFT LCD Display,
1024x768 Industrial TFT LCD Display,
LVDS Interface TFT Display
NEC6.5 inch Industrial TFT LCD 20pin LVDS Interface 1024x768 Resolution
NL10276BC13-01C is a 6.5" diagonal a-Si TFT-LCD display panel product from NEC LCD Technologies, Ltd. (hereafter called NEC), with an integral WLED backlight system, without backlight driver, without touch screen. It features an operating temperature range of -20 ~ 70°C , a storage temperature range of -30 ~ 80°C , and the maximal vibration level of 2.0G (19.6 m/s²). It's general features are summarized by ADIA-LCD in the following: Hight Brightness, Lamp Repaceable, WLED Backlight, 180° Reverse, 6/8 bit , T-EVT. Based on its features, ADIA-LCD recommend that this model be applied to Industrial etc.
General Specifications of Industrial TFT Display
|Basic Info :||Panel Brand||NEC||Panel Model||NL10276BC13-01C|
|Diagonal Size||6.5"||Application||Model Alias|
|Panel Type||a-Si TFT-LCD , LCM||Model Alias|
|Reliability :||Operating Temp.||.-20 ~ 70 °C||Storage Temp.||.-30 ~ 80 °C|
|RoHS State||RoHs||Vibration Rating||2.0G (19.6 m/s²)|
|Pixel Features:||Pixel Format||1024(RGB)×768, XGA||Dot Pitch||0.043×0.129 mm (H×V)|
|Configuration||RGB Vertical Stripe||Pixel Pitch||0.129×0.129 mm (H×V) [196PPI]|
|Mechanical Size :||Display Area||132.096×99.072 mm (H×V)||Bezel Area||135.9×102.8 mm (H×V)|
|Outline Dim||153×118 mm (H×V)||Outline Depth||9.0±0.5 mm|
|Outline Features :||Form Factor||Flat Rectangle||Orientation||Landscape type|
|Aspect Ratio||4:3 (H:V)||Shape Style|
|Holes & Brackets :||Side mounting holes (4-M2) on left, right bezel|
|Other Features :||Weight||170/190g (Typ./Max.||Surface||Clear, Hard coating (2H), Antireflection|
Outline Dimension (unit: mm)
1.1.Polarizer Cleaning, Petroleum ether (or N-hexane) is recommended for cleaning the front/rear polarizers and reflectors, acetone, toluene and ethanol are not allowed to avoid damaging the surface.
1.2. Body grounding, must wear Anti-ESD wrist strap while pick up LCDs.
1.3. FPC Soldering, less than 300℃/3S, solder must be grounding on grounding bench.
1.4. If use electric Screwdriver to do assembly, screwdriver must be grounding.
2.1. Keep in a sealed polyethylene bag.
2.2. Keep in a dark place.
2.3. Keep in temperature between 0°C and 35°C.
NOT allowed at 70°C for more than 160 Hours, or at -20°C for more than 48 Hrs.
If liquid crystal leak out of a damaged glass cell, DO NOT put it in your mouth or touch eyes, if the liquid crystal touch your skin or clothes, please wash it off immediately using soap and water.
Unless otherwise agreed between ADIA and customer, ADIA will replace or repair any of its LCD modules which are found to be functionally defective when inspected in accordance with ADIA LCD acceptance standards (copies available upon request) for a period of one year from date of shipments. Cosmetic/visual defects over specs must be returned to ADIA within 30 days of shipment. Confirmation of such date shall be based on freight documents. The warranty liability of ADIA limited to repair and/or replacement on the terms set forth above. ADIA shall not be responsible for any subsequent or consequential events.
4.1RETURNING LCM UNDER WARRANTY – TERMS AND CONDITIONS
4.1.No warranty can be granted if the precautions stated above have been disregarded. The typical examples of violations are :
- Broken LCD glass.
- Circuit modified in any way, including addition of components.
4.2.Module repairs will be invoiced to the customer upon mutual agreement. Modules must be returned with sufficient description of the failures or defects. Any connectors or cable installed by the customer must be removed completely without damaging the PCB’s eyelet, conductors and terminals.
Q1. How can I trust your product quality?
--Our Raw materials are all ROHS compliant .
--Display is an ISO9001:2008 and ISO9001:2015 Certified company, we’ve been adhering to the ISO standards strictly in our production.
--Our products are 100% Visual and Function test before shipments.
Meanwhile, we do necessary Aging test and Reliability tests to our TFT Display modules, eg. Store and Operate in High and Low Temperature & High Humidity Environment, ESD and anti-interference test , Drop(with package) and Vibration Test.
Our Touch Screens goes through Salt spray test, Hardness test, Steel ball Drop test, Flatness test, Thermal shock test…
--Our experience and proficiency make the qualification rate always being 99.7% or above.
Contact Person: Joe Chen