Send Message
ShenZhen Adia Techology CO.,LTD
ShenZhen Adia Techology CO.,LTD
products
Home /

products

Sharp 3.5in QVGA Sunlight Readable TFT 6 Bit RGB 113PPI For Handheld PDA

Product Details

Place of Origin: china

Brand Name: Sharp

Certification: RoHS

Model Number: LQ035Q7DH07

Payment & Shipping Terms

Minimum Order Quantity: 10pcs

Price: USD 15-18/ PCS

Packaging Details: Piling number of cartons : Max 8; Carton size :575mm × 332mm × 209mm ;Package quality in one cartons : 100pcs

Delivery Time: 20-25

Supply Ability: 10KK/M

Get Best Price
Contact Now
Specifications
Highlight:

3.5in QVGA Sunlight Readable TFT

,

Handheld PDA Sunlight Readable TFT

,

113PPI Tft Lcd Touch Screen

Screen Size:
3.5 Inch
Model Name:
LQ035Q7DH07
Pixel Format:
240(RGB)×320 [QVGA] 113PPI
Color Depth:
262K 26% NTSC
Viewing Angle:
40/40/40/50 (Typ.)(CR≥2)
Response:
30/50 (Typ.)(Tr/Td) Ms
Treatment:
Hard Coating (3H)
Arrangement:
RGB Vertical Stripe
Screen Size:
3.5 Inch
Model Name:
LQ035Q7DH07
Pixel Format:
240(RGB)×320 [QVGA] 113PPI
Color Depth:
262K 26% NTSC
Viewing Angle:
40/40/40/50 (Typ.)(CR≥2)
Response:
30/50 (Typ.)(Tr/Td) Ms
Treatment:
Hard Coating (3H)
Arrangement:
RGB Vertical Stripe
Description
Sharp 3.5in QVGA Sunlight Readable TFT 6 Bit RGB 113PPI For Handheld PDA

Sharp 3.5 inch QVGA 6 Bit RGB Sunlight Readable TFT For Handheld PDA

 

      LQ035Q7DH07 is a 3.5-inch LCD module product using a-Si TFT-LCD technology from Japan's Sharp Corporation (Sharp). It is equipped with a WLED backlight, no backlight driver, and no touch. According to the product specification of LD-21910A released by Sharp on October 2, 2009, the display resolution of LQ035Q7DH07 is 240 (RGB)×320 (QVGA), and the aspect ratio is 3:4 (width: High), the pixels are arranged in RGB vertical strips. Its display area size is 53.64×71.52 (width×height) mm, visual size is 57.4×75.2 (width×height) mm, appearance size is 65×86.2 (width×height)×3.4 (thickness) mm, surface treatment It is Hard coating (3H), and the net weight of the product is 34.0g (Typ.). This product uses 6S1P WLED as its backlight as an edge light source. The light source has a service life of 5K hours and does not include a backlight driver. LQ035Q7DH07 uses Parallel RGB (1 ch, 6-bit) signal interface, a total of 50 pins, connected by FPC, and the driving voltage is 5.0/3.3/15.0/-10.0V (Typ.)(VSHA/VSHD/VDD/VEE) .

 

General Specifications

NO. Item Specification Unit Remark
1 LCD Size 3.5 inch -
2 Manufacturer Sharp - -
3 Resolution 240x (RGB) x 320 pixel -
4 Screen Type LCM , a-Si TFT-LCD - -
5 Color Depth 262K 26% NTSC - Note
6 Good View at 6 o'clock - -
7 Contrast Ratio 80 : 1 (Typ.) (TM) 3:1 (Typ.) (RF) - -
8 Luminance 250 cd/m² (Typ.) cd/m2 Note
9 Outline Dim  65 × 86.2 × 3.4 (H×V×D) mm Note
10 Active Area 53.64 × 71.52 (H×V) mm -
11 Bezel Area 7.4(H)×75.2(V) mm mm -
12 Weight 34.0g (Typ.) g -
13 Operating Mode  Transflective TN, Normally White - -
14 Touch Panel Without bit -
15 Light Source 6S1P WLED , 5K hours , No Driver - -
16 Interface Type Parallel RGB (1 ch, 6-bit) , 50 pins FPC - -
17 Operating Temperature -10~70°C ºC -
18 Storage Temperature -25~70°C ºC -

 

Outline Dimension (unit: mm)

Sharp 3.5in QVGA Sunlight Readable TFT 6 Bit RGB 113PPI For Handheld PDA 0

 

 

 

Why Choose us:

1.Our company established in 2011, and have a long-term cooperation with many well-known company.

2.We have a professional r&d team and technical support.

3.We have a large number of spot inventory and we can ship delivery asap after payment.

4.We are direct agent of these brands,ordering process simple and delivery time short.

5.All screen ship from our company has long warranty and we have enough technical support can provide after-sales service.

 

PRECAUTIONS

1.HANDLING

1.1.Polarizer Cleaning, Petroleum ether (or N-hexane) is recommended for cleaning the front/rear polarizers and reflectors, acetone, toluene and ethanol are not allowed to avoid damaging the surface.

1.2. Body grounding, must wear Anti-ESD wrist strap while pick up LCDs.

1.3. FPC Soldering, less than 300℃/3S, solder must be grounding on grounding bench.

1.4. If use electric Screwdriver to do assembly, screwdriver must be grounding.

2.STORAGE

2.1. Keep in a sealed polyethylene bag.

2.2. Keep in a dark place.

2.3. Keep in temperature between 0°C and 35°C.

NOT allowed at 70°C for more than 160 Hours, or at -20°C for more than 48 Hrs.

3.SAFETY

If liquid crystal leak out of a damaged glass cell, DO NOT put it in your mouth or touch eyes, if the liquid crystal touch your skin or clothes, please wash it off immediately using soap and water.

4.LIMITED WARRANTY

Unless otherwise agreed between ADIA and customer, ADIA will replace or repair any of its LCD modules which are found to be functionally defective when inspected in accordance with ADIA LCD acceptance standards (copies available upon request) for a period of one year from date of shipments. Cosmetic/visual defects over specs must be returned to ADIA within 30 days of shipment. Confirmation of such date shall be based on freight documents. The warranty liability of ADIA limited to repair and/or replacement on the terms set forth above. ADIA shall not be responsible for any subsequent or consequential events.

4.1RETURNING LCM UNDER WARRANTY – TERMS AND CONDITIONS

4.1.No warranty can be granted if the precautions stated above have been disregarded. The typical examples of violations are :

- Broken LCD glass.

- Circuit modified in any way, including addition of components.

4.2.Module repairs will be invoiced to the customer upon mutual agreement. Modules must be returned with sufficient description of the failures or defects. Any connectors or cable installed by the customer must be removed completely without damaging the PCB’s eyelet, conductors and terminals.

 

FAQ

Q1. How can I trust your product quality?

A:

--Our Raw materials are all ROHS compliant .

--Display is an ISO9001:2008 and ISO9001:2015 Certified company, we’ve been adhering to the ISO standards strictly in our production.

--Our products are 100% Visual and Function test before shipments.

Meanwhile, we do necessary Aging test and Reliability tests to our TFT Display modules, eg. Store and Operate in High and Low Temperature & High Humidity Environment, ESD and anti-interference test , Drop(with package) and Vibration Test.

Our Touch Screens goes through Salt spray test, Hardness test, Steel ball Drop test, Flatness test, Thermal shock test…

--Our experience and proficiency make the qualification rate always being 99.7% or above.

 

Q2. Which sizes of LCDs and Touch Panels do you provide?

A:

--Small sizes which include: 0.96, 1.22, 1.3, 1.44, 1.54, 1.77, 2.0, 2.4, 2.7, 2.8, 3.0, 3.2, 3.5, 3.95, 3.97, 4.3, 5, 5.6, 6.86.

--Middle sizes which include: 7, 8, 9, 10.1, 10.2, 13.3”,14.1",15.6",17",21.5",23

Q3. Can I have a sample order of before formal order?
A: Yes, sample order is always welcome for new projects or replacement of running projects. We have stock of many standard models of TFT LCD modules and Touch screens from 0.96inch to 13.3inch , which means delivery is able to be made the same day as order.

Q4. What is the lead time for Sample order and Mass Production order?
A:
--For LXDisplay standard products, the lead time for samples is usually 1-7 days, for mass production it could be as fast as 10 days.

--For Customized products,

We are able to get new FPC ready in 7days, new Backlight in 15days, and new Capacitive touch panel or Resistive touch panel in 18days.

Mass production of special products could be as fast as 3weeks.

--In summary, based on our years of big output, we have been keeping good relationship with LCD panel, IC and other material suppliers, we had a steady supply even when there was heavy shortage of materials.

Q5. Do you have MOQ requirement?
A: Yes, it depends on different sizes of products. Please refer to our sales, thanks.

Q6. How do I work with you on Customized products?
A: Firstly please provide us the description of your special requirements, any Drawing or Specification---Our engineers will work out the compatible solution and also mould cost (if any)---We provide Drawing and Specification for Approval---We provide samples for approval after reliability test and aging test---We make modification if necessary---We do small quantity of trial order (if required)---We do mass production.

53.64 × 71.52 (H×V)
Send your inquiry
Please send us your request and we will reply to you as soon as possible.
Send